LG U+ TV 리모컨 개인정보처리방침

시행일: 2026-08-07 · 개정일: 2026-09-17 · 앱: LG U+ TV 리모컨 (kr.co.elta.uplustv) · 개발자: EltaCrew

요약 — 회원가입·로그인이 없습니다.
이 앱은 스마트폰의 적외선(IR) 송신, 블루투스(BLE), 같은 Wi-Fi 안의 TV 연결 — 세 가지 방식으로 TV 등 가전을 원격 제어합니다. 어떤 방식이든 신호는 휴대폰과 TV 사이에서만 오가며 개발자 서버를 거치지 않습니다. 리모컨 버튼 입력은 기기 안에서만 처리되며 개발자 서버로 전송되지 않습니다. 광고 표시를 위해 Google AdMob이 대략적 위치·기기 식별자 등을 수집할 수 있습니다.

1. 처리하는 정보

항목내용저장 위치
리모컨 버튼 입력선택한 버튼에 대응하는 신호를 적외선 송신기·블루투스·Wi-Fi(로컬 네트워크) 중 선택한 연결로 TV 에 즉시 전송합니다. 저장되지 않고, 외부로 전송되지 않습니다.기기 내부 (미저장)
TV 연결 정보 (Wi-Fi 연결 시)같은 네트워크에서 찾은 TV 의 이름·IP 주소와, TV 화면의 6자리 코드로 페어링할 때 앱이 스스로 만드는 클라이언트 인증서. 휴대폰 안 앱 저장소에만 저장되고 외부로 전송되지 않습니다. 블루투스 페어링 기록은 Android 시스템이 관리합니다.기기 내
대략적 위치·기기 식별자·앱 상호작용Google AdMob 광고 SDK가 광고 제공을 위해 수집합니다(아래 3항 참조).Google로 전송

이 앱은 이름·이메일·전화번호 등 개인을 식별할 수 있는 정보를 직접 수집하지 않습니다. 회원가입·로그인 기능이 없습니다.

2. 권한

권한용도필수 여부
적외선 송신 (TRANSMIT_IR)TV에 리모컨 신호를 보내는 핵심 기능필수(적외선 송신기가 없는 기기는 해당 기능 비활성)
진동 (VIBRATE)버튼을 눌렀을 때 촉각 피드백선택
블루투스 (BLUETOOTH_CONNECT, BLUETOOTH_SCAN, BLUETOOTH_ADVERTISE · Android 11 이하 BLUETOOTH, BLUETOOTH_ADMIN)블루투스 연결 방식에서 휴대폰이 BLE 리모컨(HID) 으로 동작해 TV 가 연결하도록 광고·연결합니다. 기기 안에서만 처리되며 수집·전송하지 않습니다.선택 (블루투스 연결을 쓸 때만 요청)
정확한 위치 (ACCESS_FINE_LOCATION · Android 11 이하만)Android 11 이하에서 블루투스 기기 검색에 위치 권한을 요구하는 시스템 규정 때문에 함께 요청됩니다. 위치 정보를 읽거나 저장·전송하지 않습니다. Android 12 이상에서는 neverForLocation 으로 선언해 위치와 무관합니다.선택 (Android 11 이하, 블루투스 연결 시)
Wi-Fi 상태 / 멀티캐스트 (ACCESS_WIFI_STATE, CHANGE_WIFI_MULTICAST_STATE)같은 Wi-Fi 안의 TV 를 찾는 mDNS 검색용. 로컬 네트워크 안에서만 동작합니다.선택 (Wi-Fi 연결을 쓸 때만)
인터넷 / 네트워크 상태 (INTERNET, ACCESS_NETWORK_STATE)광고 표시와, Wi-Fi 연결 방식에서 같은 네트워크의 TV 와 통신(로컬)하는 데 사용합니다. 개발자 서버는 없습니다.광고 표시·Wi-Fi 연결용

위치·연락처·카메라·저장소·마이크 등 다른 권한은 요청하지 않습니다.

3. 광고 (제3자 서비스)

이 앱은 Google AdMob 광고를 표시합니다. AdMob(Google)은 광고 제공을 위해 광고 ID, 기기 식별자, 대략적 위치, 앱 상호작용 정보를 수집할 수 있으며, 이 데이터는 암호화되어 전송됩니다. 광고 목적으로만 사용되고, 계정과 연결되지 않습니다.

4. 데이터 보관·삭제

5. 아동

이 앱은 아동을 대상으로 하지 않으며, 아동의 개인정보를 고의로 수집하지 않습니다.

6. 문의

개인정보 문의: [email protected]

7. 변경

본 방침의 변경 사항은 이 페이지에 게시됩니다.

Firebase 오류 보고·사용 통계 (2026-09-18 추가)

앱은 Google Firebase Crashlytics 와 Firebase Analytics(Google LLC)를 사용해, 앱이 비정상 종료되거나 오류가 났을 때의 진단 정보와 화면·기능 사용 통계를 수집합니다.

자세한 내용: Google 개인정보처리방침 · Firebase 개인정보 보호 및 보안


LG U+ TV Remote Control Privacy Policy

Effective: 2026-08-07 · Last updated: 2026-09-18 · App: LG U+ TV Remote Control (kr.co.elta.uplustv) · Developer: EltaCrew

Summary — no sign-up or login.
This app controls TVs and other appliances in three ways: your phone's infrared (IR) transmitter, Bluetooth (BLE), and a TV on the same Wi-Fi network. In every case the signal travels only between your phone and the TV — never through a developer server. Remote button presses are processed entirely on your device and are never sent to the developer. Google AdMob may collect approximate location, device identifiers, and similar data to serve ads.

1. Information processed

ItemDetailsStored
Remote button pressesSent immediately to the TV over whichever link you chose — the IR transmitter, Bluetooth, or Wi-Fi (local network). Not stored and never transmitted externally.On device (not stored)
TV connection details (Wi-Fi link)The name and IP address of a TV found on the same network, plus a client certificate the app generates itself when you pair with the 6-digit code shown on the TV. Stored only in the app's storage on your phone and never transmitted externally. Bluetooth pairing records are managed by Android.On device
Approximate location, device identifiers, app interactionCollected by the Google AdMob ad SDK to serve ads (see section 3).Sent to Google

This app does not directly collect personally identifiable information such as name, email, or phone number. There is no sign-up or login.

2. Permissions

PermissionPurposeRequired
Infrared transmit (TRANSMIT_IR)Core feature — sends remote signals to a TVRequired (feature disabled on devices without an IR blaster)
Vibration (VIBRATE)Haptic feedback on button pressOptional
Bluetooth (BLUETOOTH_CONNECT, BLUETOOTH_SCAN, BLUETOOTH_ADVERTISE; on Android 11 and below BLUETOOTH, BLUETOOTH_ADMIN)In Bluetooth mode the phone acts as a BLE remote (HID) and advertises itself so the TV can connect. Processed on the device only; nothing is collected or transmitted.Optional (requested only when you use the Bluetooth link)
Precise location (ACCESS_FINE_LOCATION; Android 11 and below only)Requested alongside Bluetooth on Android 11 and below because the system requires it for Bluetooth device discovery. Location is never read, stored, or transmitted. On Android 12+ Bluetooth scanning is declared neverForLocation.Optional (Android 11 and below, Bluetooth link only)
Wi-Fi state / multicast (ACCESS_WIFI_STATE, CHANGE_WIFI_MULTICAST_STATE)mDNS discovery of a TV on the same Wi-Fi network. Works only inside your local network.Optional (Wi-Fi link only)
Internet / network state (INTERNET, ACCESS_NETWORK_STATE)Serving ads, and in Wi-Fi mode talking to the TV on the same local network. There is no developer server.For ads and the Wi-Fi link

No other permissions (location, contacts, camera, storage, microphone) are requested.

3. Advertising (third party)

This app shows ads via Google AdMob. AdMob (Google) may collect advertising ID, device identifiers, approximate location, and app interaction data to serve ads; this data is transmitted encrypted. It is used only for advertising and is not linked to an account.

4. Retention & deletion

5. Children

This app is not directed at children and does not knowingly collect personal information from children.

6. Contact

Privacy inquiries: [email protected]

7. Changes

Any changes to this policy will be posted on this page.

Crash reporting and usage analytics (Firebase) — added 2026-09-18

The app uses Google Firebase Crashlytics and Firebase Analytics (Google LLC) to collect diagnostic information when the app crashes or hits an error, and statistics about which screens and features are used.

Details: Google Privacy Policy · Privacy and Security in Firebase